The economy Non Hemi Predator 212 Mod 2 kit comes with the following

Economy diecast flywheel

6256 billet ARC rod (3.328 length for .020 below deck piston height with .550 flat top piston)

Mod 2 Dyno cams camshaft

Honda wide slot thin guide plate

1.2 ratio heavy duty stamped rocker arms

.062 valve spring shims (2, one for under each spring)

5.200 long chromoly pushrods (2)

22 pound springs

8 deg timing key

Flat top .550 height piston (for more compression)

Valve cover gasket

Side cover gasket

.009 non hemi 212 head gasket

This kit will be perfect for the beginner builder that wants a little more juice than his stock carb update and pipe will give him. By using a .009 head gasket with the 3.328 rod with the flat top piston you will increase compression to 9.5:1 and still be able to run 87-93 octane fuel (prefer 89-93). It will easily make power past 7000 rpm and will work very well with a China VM22, Nibbi 24 round slide or equivalent carburetor as well as stock or bored stock units.

Don't forget lapping compound for your flywheel, you MUST lap the flywheel or failure will happen.

Still looking for more and want a custom head?

Yes, we can help with that to. Feel free to check out our custom head selection or ask.