SBH_ Small Block Billet Head

Includes

1. Billet head
2. .Valves, Springs, and Retainers
3. O Ring Seals
4. Head Bolts and Other Hardware
5. 1.25:1 True Shaft Roller Rockers
6. Intake and Exhaust Flanges

DED racing has taken its 20 years of air cooled cylinder head development experience and integrated it into our new billet Honda/Clone head. Introducing the SBH designed to be an affordable replacement/upgrade for the stock cast head. With its integrated rocker arms, superior flow and rigidity it offers performance and value that can't be matched by a cast head or even other billet heads. It is designed to be a true bolt on product where the critical items are included so you don't have to search far and wide to get your project together. This also allows us to ensure that things like rocker arm geometry is optimized and perfect. ( Simply, More Powerful- means we offer products that make your sport more fun not more frustrating).

• Fully CNC machined from a solid billet of aluminum
• Made in the USA
• 4 bolt flanges with silicone O-ring seals (no gaskets to worry about) superior seal
• Offset intake valve to deshroud from cylinder wall (better flow)
• Offset Rocker Billet Roller Rockers (to accommodate the offset valve location)
• Shaft rockers are lighter than stud mounted and at least as rigid
• The correct intake to exhaust valve size, smaller exhaust valves allows us to move the intake valve away from the cylinder wall
• High velocity, correctly sized ports, peak power ~8750rpm with a flat long power curve.
• Rockers made from 2024 material for its superior mechanical properties
• Rockers use full compliment needle bearing pivot for minimal friction
• Non Beryllium Copper Valve Seats (4 times the heat conduction of steel seats to remove heat from valves) (same material as cup car engines)
• Premium Stainless Valves 1.25" Intake and 1" Exhaust
• High Efficiency Combustion Chamber with 10mm spark plug to reduce distortion
• Maximized cooling by use of many well placed fins to aid in reliability and power
• High performance manganese bronze valve guides
• Competition Cams premium valves springs Included_Constructed from Pacaloy®
• DED Billet 7075 light weight high strength retainers

Recommendations

• Billet Flywheel_Required
• 1/4" Chromoly Pushrod_Required
• Billet Connecting Rod_Required
• High Performance Piston_ Highly Recommended
• Run with at least 16 OZ of 4T Briggs and Stratton/Amsoil Oil
• .310 or less lift Cam Shaft_with the 1.25" rockers this lift is optimal.-Bigger Cams waste torque and reduce the overall power output of the head.
• 28mm Carburetor, or HL 380 series Tillotson style carb_ Intake ID is 1.125"
• Methanol Fuel is highly recommended for its cooling and power effect.
• Race Gas/Premium Mix_ 50/50% but, a 212 could probably run on 93 oct OK for drag racing applications where less heat is present.
• Timing 30-32 on Gas 33-35 on Methanol

Made right here in Wisconsin